(1/2) 002-05 / 20070201 / e9617_mem_p.fm ? all specifications are subject to change without notice. 3-terminal filters(smd) for wide-band mem series mem2012p type features multilayer chip emc filter that is small and low-profile due to the use of a -type circuit. entirely monolithic structure results in high reliability. due to closed magnetic circuit architecture, high-density installation becomes possible, and crosstalk generation is prevented. steep attenuation characteristic plot. highly effective noise suppression. covers a wide range of frequencies. -type circuit with 1 coil /2 capacitors construction. applications computers, computer peripherals, vcrs, tvs, car audio equip- ment, printers, game machines, etc. temperature ranges product identification (1)series name (2)dimensions l w (3) -type circuit (4)cutoff frequency 10r0:10mhz (5)packaging style t:taping packaging style and quantities shapes and dimensions/recommended pc board pattern electrical characteristics conformity to rohs directive operating/storage ?40 to +85c packaging style quantity taping 4000 pieces / reel mem 2012 p 10r0 t (1) (2) (3) (4) (5) part no. cutoff frequency (mhz) attenuation (db)min. rated voltage edc(v)max. rated current idc(ma)max. mem2012p10r0 10 20[0.2 to 2ghz] 12 200 mem2012p25r0 25 20[0.3 to 2ghz] 12 200 mem2012p50r0 50 20[0.4 to 2ghz] 12 200 mem2012p75r0 75 20[0.7 to 2ghz] 12 200 MEM2012P101R 100 20[1.5 to 2ghz] 12 200 1.5 0.8 0.7 0.2 0.2 0.7 0.8 1.5 1 1 0.5 0.5 marking 2 0.2 gnd 4 1 in/out 2 gnd 3 out/in 1.25 0.2 0.4 0.15 0.4 0.15 0.4 0.15 0.2min 0.2min 0.8+0.15, ?0.2 weight: 8mg dimensions in mm please contact our sales office when your application are considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/2) 002-05 / 20070201 / e9617_mem_p.fm all specifications are subject to change without notice. typical electrical characteristics attenuation vs. frequency characteristics recommended soldering condition reflow soldering measuring circuit MEM2012P101R mem2012p75r0 mem2012p50r0 mem2012p25r0 mem2012p10r0 0 10 20 30 40 50 60 70 1 10 100 1000 10000 frequency ( mhz ) attenuation ( db ) natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) gnd l c c v.v. sg 50 ? 50 ? 13 4 2
|